£6.56

Schultz & Larsen Red Handle T-Wrench
[SL-TWRENCH]


Schultz & Larsen Red Handle T-Wrench (4mm Hex)

For use with Schultz & Larsen rifles, including the Classic DL, Victory and Ambassador. The T-Wrench is use primarily to un-tighten the vital screws to remove and reattach the barrel.

There are two screws on the trigger mechanism plate to loosen. These are undone and removed, then trigger mechanism plate drops out to free the barrelled action. This is to be taken out from the top of the stock, once removed, there are two more screws which hold the barrel into the action. These need to be loosened with the T-Wrench also, but only by 1/2 to 3/4 turn, then out slides the barrel.

When reattaching the barrel. Slide the barrel back into the action ensuring the lug in the action slots fully into the barrel. Insert the bolt and close to guarantee the position is correct. Tighten the screws on the action gradually by alternating between the two until fully tightened. Once the barrel is attached, insert the barrelled action back into the stock, then attach the trigger mechanism plate back in place and tighten up the two screws (smaller of the two at the front). Do this alternatively until fully tightened.

Length: 125mm
Weight: 31 g
4mm Hex/Allen Wrench Made in Germany
Reviews

Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Ziegler Quick Release Mount for Blaser - 34mm Rings
1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)
1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings
1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail
1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail
1 x Ziegler Quick Release Mount for Blaser - 30mm Rings
1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail
1 x Schultz & Larsen Red Recoil Pad
1 x Schultz & Larsen Picatinny Rail for Legacy (20 MOA)
1 x Schultz & Larsen Picatinny Rail for Ambassador (0 MOA)
1 x Schultz & Larsen Picatinny Rail for Victory (20 MOA)
1 x Schultz & Larsen Picatinny Rail for Legacy (0 MOA)
1 x Schultz & Larsen Picatinny Rings 30mm, 4mm BH
1 x Schultz & Larsen Picatinny Rail for Victory (0 MOA)
1 x Schultz & Larsen Scope Rings 25.4mm, Extra High (20mm BH)
1 x Schultz & Larsen Red Handle T-Wrench
1 x Schultz & Larsen Scope Rings 25.4mm, High (16mm BH)
1 x Schultz & Larsen Picatinny Rail for Classic DL (0 MOA)
1 x Recknagel Picatinny/Weaver Bases - Schultz & Larsen [57080-3093]
1 x Schultz & Larsen Picatinny Rail for Classic DL (20 MOA)
1 x Schultz & Larsen Picatinny Rail for Tikka T3 (20 MOA)
1 x Schultz & Larsen Picatinny Rail for Tikka T3 (0 MOA)
1 x Schultz & Larsen Picatinny Rail for Ambassador (20 MOA)
1 x Schultz & Larsen Picatinny Rings 30mm, 7mm BH
1 x Schultz & Larsen Scope Rings 25.4mm, Low (7mm BH)
1 x Schultz & Larsen Picatinny Rail for Browning X-Bolt Long (0 MOA)
£3,831.45